Product added to cart
Ultra Circular Drain Seal Plus 12in dia. - Item #DS2174
$181.44
In stock
SKU
DS2174
- Ultra-Drain Seal Plus, Circular 12 inch
- A long-term solution for storm drain protection
- Excellent for use in parking areas, loading docks and other areas where drains may be driven over
Ultra Circular Drain Seal Plus 12 in dia.
The Ultra-Drain Seal Plus is a long-term solution for storm drain protection. Its multi-layered design is better suited for extended exposure to ultraviolet (UV) rays and can be left in place for longer periods of time.
Product Highlights
- Urethane bottom layer (same as Ultra-Drain Seal) keeps spills from entering drains. Flexible, non-absorbing bottom layer material is reinforced with tear-resistant mesh.
- Rugged, reinforced polyethylene top layer (yellow) provides protection from extended UV exposure.
- Excellent for use in parking areas, loading docks and other areas where drains may need longer-term spill protection.
- Helps comply with SPCC and NPDES.
Specifications
- Dimensions: 12 x 12 x .6 in (304.8 x 304.8 x 16) mm
- Weight: 4 lbs or 1.8 kg
- Part #: 2174
- Shape: Circular
| Brand | UltraTech |
|---|---|
| Type | Drain Seals |
| Style/Model | Circular |
| Dimensions | 12 x 12 x .6 in |
| Diameter | 12 in |
| Material | Urethane bottom, Polyethylene top |
How To Use The Ultra-Drain Seal®
Protective cover for drains, grates and manholes against accidental spills.
Follow these easy steps to assure maximum effectiveness:
1. Make sure the Ultra-Drain Seal® is the correct size.
For best results, use a Ultra-Drain Seal® which is 6” larger than the outside of the grate.
A. Remove all stones, branches, or other debris off the object you desire to cover.
B. Remove the plastic film from the Ultra-Drain Seal® and remember to keep it to re-apply before storage.
C. Place the Ultra-Drain Seal® over the drain, grate, or manhole you desire to seal.
D. To gain a faster seal you may step on the DrainSeal®. Never attempt this after spill has reached the drain.
A. Wash the Ultra-Drain Seal® and its plastic film in warm water with a non-abrasive detergent or petroleum solvent cleaner.
B. Dry both the Drain Seal® and plastic film with a cloth and reapply the plastic film to the Drain Seal®.
C. Using the tube provided, roll up the Drain Seal® and place it back into the box for storage.
D. Store the Ultra-Drain Seal® out of direct sunlight, and at room temperature.
Important Notes:
• Never allow the Ultra-Drain Seal® to touch itself for long periods of time.
• The Ultra-Drain Seal® will become less flexible if stored in cold temperatures.
• Due to the nature of softer urethane, the physical properties of these products may change with exposure to certain environmental conditions like temperature, humidity and UV radiation. Please inspect the stored product regularly to ensure it is in a usable state.
Not intended for long-term outdoor use (more than two (2) hours), as UV exposure and/or heat for extended periods can degrade the product. For applications where extended use may be required, the Ultra-Drain Seal Plus® should be considered.
Write Your Own Review
