Product added to cart
Oil-Only MeltBlown Roll -Heavy Weight
$111.51
In stock
SKU
SR1046-0
- Floats even when completely saturated — most effective for marine spills
- Repels water and soaks up only oil and oil-based fluids
- Oil-Only Responder Roll 30" x 150' - Heavy Weight, 1 roll per package
Economical MeltBlown mat for effective oil response.
- Best performing mat on water due to fast-wicking fibers
- Highly absorbent MeltBlown polypropylene mat repels water and soaks up only oil and oil-based fluids
- Floats even when completely saturated — most effective for marine spills
- Bright white color makes it easy to locate in spill emergencies
- Won't fall apart even when fully saturated
- Rolls are ideal for covering large areas
Regulations and Compliance
- Under an OSHA requirement, "DOT-specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks, or ruptures may occur."
- OSHA requires containment and cleanup materials for spills in laboratories to reduce occupational exposure to hazardous chemicals.
- Floors in your workplace should be, "maintained in a clean and, so far as possible, a dry condition."
- In the event of a spill, transporters must, "take appropriate immediate action to protect human health and the environment."
- Transporters, "must clean up any hazardous waste discharge that occurs during transportation…so that the hazardous waste discharge no longer presents a hazard to human health or the environment."
-The area between a container and a salvage drum used for overpacking must have "sufficient cushioning and absorption material to prevent excessive movement of the damaged package and to eliminate the presence of any free liquid at the time the salvage drum is closed."
Specifications
Dimensions: 30" W x 150' L
Shipping Dimensions :17" W x 30" L x 17" H
Sold as : 1 roll per package
Color: White
Composition : Polypropylene
Absorbency : Up to 63.4 gal. per package
Weight : 25.6 lbs.
# per Pallet : 15
Basis Weight: HeavyWeight
Incinerable : Yes
UNSPSC : 47131901
Spilltech Manufacturer Part #WR150H
| Brand | SpillTech |
|---|---|
| Type | Oil-Only MeltBlown Roll |
| Style/Model | Heavy Weight |
| Dimensions | 30" W x 150' L |
| Length | 150 Feet |
| Width | 30in |
| CFR Compliant | Yes |
| Material | Polypropylene |
| Absorbency | Up to 63.4 gal. per package |
| Incinerable | Yes |
| Amount Per Pallet | 15 |
| Count | 1 |
| Sold As | Roll |
| Features | Repels water |
7 Steps of Spill Response:
Assess the Risk: From the moment a spill occurs and the throughout the response, determine the risks that may affect human health, the environment, and property. Always put SAFETY FIRST! If possible, identify the material spilled and try to determine how much was spilled.
Select Personal Protective Equipment (PPE): Choose the appropriate PPE to safely respond to the spill. Consult Safety Data Sheets (SDS) and literature from the chemical and PPE manufacturers for the best recommendations. If you are uncertain of the danger and the material is unknown, assume the worst and use the highest level of protection. Remember SAFETY FIRST.
Confine the Spill: Speed counts. Limit the spill area by blocking, diverting or confining the spill using sorbents and sorbent socks. Stop the flow of liquid before it has a chance to contaminate a water source (be on the lookout for drains!).
Stop the Source: After the spill is confined, stop the source of the spill. This may be a simple as turning a container upright or plugging a leak in a damaged drum. Transfer liquids from the damaged container to a new one.
Evaluate the Incident and Implement Clean Up: Once the spill is confined and the leak has been stopped, it is time to reassess the incident and develop a plan of action for implementing the Spill Clean Up. Spills are commonly absorbed. Pads should be used to absorb the remainder of the spill. Simply place the pads throughout the spill area. Unused absorbents are not hazardous. However, once the sorbents are saturated with oils, solvents, etc, they may be considered hazardous waste and should be disposed of as such according to federal, state and local laws for the liquids they have absorbed.
Decontaminate: Decontaminate the site, personnel and equipment by removing or neutralizing the hazardous materials that have accumulated during the spill. This may involve removing and disposing of contaminated media, such as soil, that was exposed during the spill incident. An effective decontamination area ensures the health and safety of emergency responders.
Complete Required Reports: Complete all notification and paperwork required by federal, state and local guidelines for reporting all spill incidents. Failure to do so can result in severe penalties.
How to Use SpillTech Sorbents:
Step 1: Clean all loose sorbents, rags and other debris from the area.
Step 2: Place a SpillTech sorbent directly on top of the problem area. Watch as it pulls in liquids into the sorbent.
Step 3: When the pad or roll is fully saturated, simply pick it up and dispose of it. You’ll know when it’s fully saturated when you see liquids puddling around or passing underneath the sorbent. Don’t forget to replace it with a fresh SpillTech sorbents.
Helpful Hints: • Cover a spill evenly, making sure even stray droplets are covered • For best results, use white sorbents for oil-only applications (will repel water) and gray or yellow for universal or hazardous applications. • Although the sorbents themselves are not hazardous, the liquid they absorb might be. A sorbent will take on the hazardous characteristics of anything it absorbs. Therefore, it is important that you dispose of the sorbent in a manner that is consistent with the liquid itself. Consult the chemical’s Safety Data Sheet (SDS) for further disposal information.
Write Your Own Review
Related Products
