Product added to cart
Drum Repair Kit
$599.60
In stock
SKU
SK0001
- Repairs punctures, cracks, gashes or surface rotting
- Covers cracks, hairline cracks and small holes in any type of low-pressure vessel
- Dimensions : 8" W x 18" L x 8" H
Repair punctures, cracks, gashes or surface rotting with this all-inclusive Kit.
Drum Repair Kit contains components to make small repairs to containers that can leak liquid or bulk hazardous material. Covers cracks, hairline cracks and small holes in any type of low-pressure vessel. Kit features screw and “T” patches, ball and taper surface plugs, epoxy putty, lead wool, barrier tape, wood plugs and all tools and hardware.
| Brand | SpillTech |
|---|---|
| Type | Drum Repair Kit |
| Dimensions | 8" W x 18" L x 8" H |
Identify and know the chemical you are working with and its compatibility with the materials used in this kit: Stainless Steel, Zinc Plated Steel, SBR Rubber, Neoprene Closed Cell Foam
Proper protective clothing must be worn at all times!
BALL PLUGS: Used where the surface is deeply concave. Insert toggle through hole, hold outside end of bolt, slide ball firmly against hole, and tighten wing nut until leak is at its most restricted flow.
TAPER SURFACE PLUGS: Used where surface is close to flat. Apply like Ball Plugs.
“T” PATCHES: For cracks and odd holes. Use like Ball Plug except use “T” bolt to straddle crack.
HOT OR COLD HOSE TAPE: Pipes, hoses, small holes. Works best if surface is dry, but doesn’t have to be.
BARRIER TAPE: Mark off an area to keep bystanders out.
FIX STIX EPOXY PUTTY: Instructions in pack.
WOOD WEDGE PACK: Lay pad centered over hole, starting with bigger wedges, push as many as you can into the hole. Don’t cut the pad with the wedges. The wood and pad should swell up as liquid hits it, so try to keep them dry beforehand.
PLUG PATTIE: Simply insert putty directly on hole.
LEAD WOOL: For hairline cracks. Use sharp tool (screwdriver, knife, etc.) to pack lead into crack. Start on one end, pack more and more in until it holds, then continue along crack little by little until you get it plugged. The harder you pack it the stronger it gets. If after many tries the lead won’t stay in, the crack is too wide. Use a different item.
8” x 12” NEOPRENE: For extra help where you may need it.
Write Your Own Review