Product added to cart
Ultra-No Drain IBC Spill Pallet Plus
$1,442.07
In stock
SKU
SP1157
- Ultra-IBC Spill Pallet Plus, No Drain - 62 x 62 x 28 in.
- Provides economical and portable spill containment for IBCs, tanks and other large containers
Economical and portable containment for IBCs
The Ultra-IBC Spill Pallet Plus provides economical and portable spill containment for IBCs, tanks and other large containers. A 365-gallon containment sump helps meet EPA and SPCC spill containment regulations. All polyethylene (LLDPE) construction provides excellent chemical compatibility and forklift pockets makes it easy to move.
Product Highlights
- Low profile, 28" overall height - allows safe and convenient IBC tank handling and dispensing.
- All-polyethylene construction - offers excellent chemical resistance and will not rust or corrode.
- Forkliftable - allows convenient positioning to desired locations.
- Low-cost design with value-added features and benefits.
- Large 52" x 52" deck allows safe and convenient placement of IBC tanks.
- Small footprint - 62" x 62" unit requires minimal floor space.
- 365-gallon sump capacity meets SPCC and EPA Container Storage and Spill Containment Regulations.
- Optional pull over cover keeps rainwater out of sump and helps comply with stormwater management regulations.
- Five inner polyethylene (LLDPE) columns support uniformly distributed loads of up to 8,500 lbs. All components are easily removed for cleaning.
- Optional bucket shelf captures spills from dispensing. Spills that exceed 3 gallons are channeled into the 365-gallon sump through a bulkhead fitting.
Constructed with the "Cross of Life” Design
Innovative “Cross of Life” design protects the pallet’s structural integrity during heavy loads over time. As more weight is applied to the top of the pallet, the Cross of Life design draws the all-polyethylene sides towards the center instead of allowing them to sag outwards.
Compliance
- EPA Container Storage Regulation 40 CFR 264.175
- Spill Prevention, Control and Countermeasure Act (SPCC) 40 CFR 112
Specifications
- Dimensions: 62 x 62 x 28 inches (1,575 x 1,575 x 711 mm.)
- Load Capacity UDL lb.(kg): 8,500 (3,856)
- Sump Capacity gal (L): 365 (1,382)
- Weight lb. (kg): 324.0 (147.0)
- Forklift Access: 2-Way
- # per Pallet: 3
- Composition: Linear Low Density Polyethylene (LLDPE)
- Color: Yellow
- Part #: 1157 (No Drain)
| Brand | UltraTech |
|---|---|
| Type | IBC Spill Pallet |
| Drain | No Drain |
| Color | Yellow |
| Forklift Access | 2-Way |
| Dimensions | 62" x 62" x 28" |
| EPA Compliant | Yes |
| SPCC Compliant | Yes |
| Material | Linear Low Density Polyethylene (LLDPE) |
| Amount Per Pallet | 3 |
| Load Capacity | 8500 lbs |
| Sump Capacity | 365 gal |
| Duty Type | Heavy Duty |
1. There is no specific need to clean an UltraTech Spill Containment product that has not had a spill or leak as the polyethylene plastic material it is constructed from is designed to last for years in most indoor or outdoor environment. The polyethylene has a UV protective additive for prolonged outdoor exposure.
2. The products are rated for use in temperatures from -40° F to 160° F.
3. The sump area of the product should be inspected weekly for any spills or leaks. If a spill or leak is discovered, it should be cleaned up within 24 hours. If inspection shows the sump area has a crack or hole or other damage that could affect the functionality of the unit, it should be immediately removed from service.
4. To clean up a spill or a leak, use all safety precautions required for handling the particular chemical involved. Using a safe pumping method for the chemical involved, pump the spilled contents out of the containment sump and into a drum or container for proper disposal or reuse. If the chemical involved is not safe to pump, use absorbents or other means to remove the chemical from the containment sump safely. Dispose of any chemicals, used sorbents or other disposables in compliance with your local or federal regulations.
5. Once the chemical has been removed, use a sorbent mat or pad to wipe down the inside of the containment unit to remove any remaining chemical residue. Finish by washing with soap and water and allow the unit to dry before placing back into service.
6. The unit’s grating should be cleaned of any residual chemical and cleaned with soap and water.
7. If the unit had a drain plug that was removed to drain off any chemical or soap/water, be sure to replace the drain plug securely.
8. Ultra-Spill Deck Bladder System special instructions:
a. Use a hand pump with a ½” diameter tube and insert the tube into the opening of the bladder from inside the Spill Deck after removing the grate.
b. Pump the contents of the bladder and the Spill Deck into a drum or container for proper disposal or reuse.
c. If there is some remaining residue inside the bladder, lift the outside end of the bladder and allow the residue to pour back into the Spill Deck sump where it can be pumped out or absorbed with sorbents.
d. Remove the bladder from the Spill Deck by unscrewing the bulkhead fitting and dispose of the bladder properly according to local and federal regulations. DO NOT RE- USE A BLADDER. After the Spill Deck has been cleaned up, place a new bladder into the Bladder Attachment and attach it to the Spill Deck
following the instructions that accompany the replacement bladder.
Write Your Own Review
Related Products
