VSE Peening Preparation Tools are versatile, high production tools ideal for the removal of coatings from both steel and concrete substrates. A quick change hub with an assortment of abrasives enables you to rapidly remove everything from mastics and alkyds to epoxy coatings while containing hazardous dust. The PPT, with star or beam cutters, will remove coatings from many types of piping and curved surfaces. If you need a tool that will do everything from profiling steel to removing hazardous coatings, the PPT is the tool that gets the job done!
VSE Peening Preparation Tools utilize 3M™ brand Heavy Duty Tungsten Carbide tipped Rotopeen™ flaps. In accordance with SSPC surface preparation specifications it may be necessary to utilize more than one type of cleaning device to achieve SP-11.
FEATURES AND BENEFITS:
Lightweight Tools
- Can be used vertically and overhead
Available with Varying Cutting Media
- Imitates a shot blast finish
- Converts in one minute to accept other surface preparation media
Optimized Power Source Maintains Speed Under Load
- Maximizes coatings removal
Optional Accessories
- Star cutters for tackling more demanding applications such as non-skid, PRC and coal tar removal
- Available with compressed air or electric drive motors, 2” or 4” cutting widths
US Patented Vacuum Shroud
- Engineered specifically for lead based paint removal
- Maximizes debris capture and virtually eliminates detectable dust emissions
- Complies with OSHA and EPA standards easily when matched with TVS® HEPA vacuums
- 1½" vacuum port is as standard for dust free working
Model |
MPN |
Working |
Weight |
Length |
Width |
Height |
R.P.M. |
Voltage |
Air |
Power |
2" w/ Cutters |
194.C415 |
4.3" (110mm) |
16lbs (6.4kg) |
20" (508mm) |
7.8" (197mm) |
6" (152mm) |
2300 |
120 |
90psi |
1200w/8Amp |